Let's Surpass Environmental and Social Challenges
Do you think environmentally friendly products are inferior in performance?
Because polyimide water-solvent varnish uses water as its solvent, it can suppress environmental and human health impacts, as well as being an excellent product for energy saving and substrate protection. Furthermore, it does not lose the strength of polyimide even with a water solvent, and it can be used with the same processing methods as conventional NMP-based varnishes.
Three Environmental Benefits
-
Benefit 1
NPM FreeBecause organic solvents are not used, it is possible to reduce the regulatory compliance costs incurred until now.- NMP recovery equipment
- Explosion-proof equipment
- Maintenance of facility filters
-
Benefit 2
Low VOCNMP, which is commonly used as a solvent for polyimide, has adverse effects on health and the environment. Water-solvent varnish achieves consideration for the environment and health by reducing NMP solvent use by approximately 80%. -
Benefit 3
Energy Cost ReductionContributes to the reduction of energy costs through low-temperature curing (150℃ and above).
Experience NMP-equivalent performance, even with water
| Water Solvent | NMP Solvent | |||
|---|---|---|---|---|
| Development Product① | Development Product② | Development Product③ | UBE Standard Grade (UPIA®-AT) | |
| Film Thickness(μm) | 10 | 10 | 10 | 20 |
| Maximum Heat Treatment Temperature(℃) | 150 | 250 | 350 | 350 |
| Solid Content(wt%) | 18 | 11 | 18 | 18±1 |
| Solution Viscosity(Pa・s) | 3.5 | 2.5 | 4.0 | 5.0±1.0 |
| Density(103/m3) | ー | ー | 1.10 | 1.10~1.11 |
| Storage Conditions(℃) | ≦10 | ≦10 | ≦10 | ≦30 |
| Glass Transition Temperature(℃) | 145 | 210 | 339 | 274 |
| Tensile Strength(MPa) | 106 | 214 | 289 | 229 |
| Elongation Rate(%) | 199 | 164 | 96 | 92 |
| Tensile Modulus(GPa) | 1.9 | 3.2 | 4.6 | 3.7 |
| 5% Weight Loss Temperature(℃) | ー | ー | 574 | 592 |
| Dielectric Breakdown Voltage(kV) | 6※ | 6※ | 7※ | 8 |
※Measured at a film thickness of 20μm