Grade | Item | MFR | Density | Tensile strength | Tensile elongation | Flexural strength (Olsen) |
Vicat softening point |
Features | Applications |
---|---|---|---|---|---|---|---|---|---|
Test Method | ASTM D1238 | ASTM D1505 | ASTM D638 | ASTM D638 | ASTM D747 | ASTM D1525 | |||
Unit | g/10min | kg/m3 | MPa | % | MPa | ℃ | |||
Film | 0540F | 4 | 904 | 42 | 715 | 140 | 81 | Very low heat seal temp. Flexibility |
Lamination film Co-extrusion film Modification |
1540F | 4 | 913 | 39 | 730 | 190 | 97 | Lower heat seal temp. | Lamination film Co-extrusion film |
|
2040F | 4 | 918 | 36 | 755 | 280 | 104 | Low heat seal temp. | Lamination film Co-extrusion film |
|
2040FC | 5 | 919 | 36 | 755 | 280 | 104 | Transparency | Lamination film Co-extrusion film |
|
2540F | 4 | 923 | 36 | 760 | 340 | 107 | Stiffness | Lamination film Co-extrusion film |
|
3540F | 4 | 931 | 37 | 780 | 520 | 114 | Heat resistance Boiling resistance |
Lamination film Co-extrusion film |
|
3540FC | 3.6 | 931 | 35 | 780 | 520 | 114 | Heat resistance Boiling resistance Transparency |
Lamination film Co-extrusion film |
|
3540N | 4 | 931 | 37 | 780 | 520 | 114 | Additive-free | Additive-free film | |
3570FC | 6 | 931 | 35 | 780 | 510 | 114 | Heat resistance Boiling resistance Transparency |
Lamination film Co-extrusion film |
|
4040F | 4 | 937 | 37 | 780 | 760 | 119 | Heat resistance | Lamination film Co-extrusion film |
|
4040FC | 3.5 | 938 | 32 | 830 | 850 | 120 | Heat resistance Transparency |
Lamination film Co-extrusion film |
|
140HK | 3.5 | 937 | 37 | 780 | 760 | 119 | Additive-free | Additive-free film | |
4540F | 4 | 944 | 28 | 800 | 920 | 123 | Heat resistance Semi-retort |
Lamination film Co-extrusion film |
|
0520F | 2 | 904 | 43 | 690 | 140 | 82 | Very low heat seal temp. Flexibility |
Lamination film Co-extrusion film |
|
1520F | 2 | 913 | 40 | 700 | 190 | 98 | Low heat seal temp. | Lamination film Co-extrusion film |
|
2525F | 2.5 | 926 | 36 | 715 | 380 | 113 | Toughness Stiffness |
Toughness film | |
2515HF | 0.9 | 925 | 36 | 715 | 370 | 112 | Toughness | Heavy duty packaging | |
20B | 2.2 | 921 | 36 | 710 | 290 | 105 | Processability High transparency |
High transparency film | |
125FN | 2.2 | 924 | 32 | 750 | 360 | 107 | Additive-free | Additive-free film Blow molding |
|
Injection | 613A | 30 | 913 | 30 | 850 | 190 | 87 | ESCR | Injection molding Lid of container |
631J | 20 | 931 | 23 | 800 | 500 | 107 | Heat resistance Stiffness |
Injection molding | |
Lamination | 015AN | 14 | 911 | 23 | 790 | 210 | 83 | Low heat seal temp. | Extrusion lamination film |
021GT | 6 | 919 | 28 | 780 | 290 | 95 | Toughness | Extrusion lamination film | |
022GS | 8 | 904 | 30 | 810 | 150 | 78 | Very low heat seal temp. Higher heat seal speed |
Extrusion lamination film |
* These values are typical properties and not to be considered as specifications.
* Specimens are prepared from compression-molded sheets.
