Injection NAE2100U
| Characteristic | Unit | Test method | Measured value | |
|---|---|---|---|---|
| Mechanical property | ||||
| Tensile strength | MPa | ISO 527-1,2 | 75 | |
| Tensile strain at break | ％ | 18 | ||
| Flexural strength | MPa | ISO 178 | 100 | |
| Flexural modulus | MPa | 2600 | ||
| Charpy notched impact strength | kJ/m2 | ISO 179-1/1eA | 9 | |
| Thermal property | ||||
| Temperature of deflection under load | 0.45 MPa | ℃ | ISO 75-1,2 | 205 |
| Other property | ||||
| Limiting PV value | MPa・cm/sec | JIS K7218 | 1230 | |