Injection 1018I

Dry as molded
Characteristic		Unit	Test method	Measured value
Mechanical property
Tensile strength		MPa	ISO 527-1,2	45
Tensile strain at break		％		>50
Tensile modulus		MPa		1400
Flexural strength		MPa	ISO 178	55
Flexural modulus		MPa	ISO 178	1400
Charpy notched impact strength		kJ/m²	ISO 179-1/1eA	125
Tensile strength after moisture absorption		MPa	ISO 527-1,2	23
Tensile modulus after moisture absorption		MPa		500
Tensile strain at break after moisture absorption		%		>50
Flexural strength after moisture absorption		MPa	ISO 178	19
Flexural modulus after moisture absorption		MPa	ISO 178	400
Rockwell hardness	R.Scale	-	ISO 2039	100
	M.Scale			30
	R.Scale(After Moisture absorption)			65
	M.Scale(After Moisture absorption)			13
Thermal property
Melting temperature		℃	ISO 11357	215～225
Temperature of deflection under load	0.45 MPa	℃	ISO 75-1,2	75
Temperature of deflection under load	1.8 MPa	℃	ISO 75-1,2	50
Coefficient of linear thermal expansion		x10^-5/K	ISO 11359-2	10.0
Electrical property
Comparative Tracking Index		-	UL 746A	0
Other property
Density		g/cm³	ISO 1183	1.07
Water absorption	equilibrium	％	UBE method	2.0