Injection 1013IU50

Dry as molded
Characteristic		Unit	Test method	Measured value
Mechanical property
Tensile strength		MPa	ISO 527-1,2	45
Tensile strain at break		％		>35
Tensile modulus		MPa		1800
Flexural strength		MPa	ISO 178	70
Flexural modulus		MPa	ISO 178	1700
Charpy notched impact strength		kJ/m²	ISO 179-1/1eA	85
Tensile strength after moisture absorption		MPa	ISO 527-1,2	28
Tensile modulus after moisture absorption		MPa		900
Tensile strain at break after moisture absorption		%		>50
Flexural strength after moisture absorption		MPa	ISO 178	24
Flexural modulus after moisture absorption		MPa	ISO 178	500
Charpy notched impact strength after moisture absorption		J/m	ISO 179-1/1eA	125
Rockwell hardness	R.Scale	-	ISO 2039	110
	M.Scale			45
	R.Scale(After Moisture absorption)			87
	M.Scale(After Moisture absorption)			12
Thermal property
Melting temperature		℃	ISO 11357	215～225
Temperature of deflection under load	0.45 MPa	℃	ISO 75-1,2	75
Temperature of deflection under load	1.8 MPa	℃	ISO 75-1,2	55
Coefficient of linear thermal expansion		x10^-5/K	ISO 11359-2	10.0
Other property
Density		g/cm³	ISO 1183	1.07
Water absorption	equilibrium	％	UBE method	2.2