| |
|
 |  | | | Coatings, Adhesives, ResinsRaw Materials for Coatings, Adhesives, and Resins |
| |  Polycarbonatediol （PCD） | | | | |  Widely used for high performance polyurethanes, Polycarbonatediol (PCD) gives higher resistance against heat, hydrolysis, oil and weather. PCD provides a smoother texture, and is ideal for use in artificial and synthetic leathers, thermoplastics, elastomers, paints and adhesives. Four grades of PCD are available.
| | | CAS 101325-00-2, 282534-15-0, 171926-76-4, 216691-97-3, MITI registered, EINECS registered, TSCA registered Trade name：ETERNACOLL? UH, UHC, UC, UM series | | | | | | Oxetane | | | | |  Cured films comprised of oxetane derivatives exhibit good properties while offering the following advantages over the use of epoxides: fewer hazards of skin and eye irritation, lower potential for mutagenesis, lower toxicity, little or no odor, and longer pot life. Four grades of oxetanes are available.
| | | CAS 3047-32-3, MITI 5-6621, EINECS 221-254-0, TSCA registered, CAS 358365-48-7, 63943-89-5, 37674-57-0, MITI (registration in progress), EINECS (not registered), TSCA (not registered)
Trade name：ETERNACOLL? EHO, OXBP, OXTP, OXMA | | | | | | Polyesterpolyol | | | | |  Widely used in producing polyurethanes, Polyesterpolyol are useful in making reactive hot melt adhesives, which require short setting times and provide good adhesion. Four grades of polyesterpolyols are available.
| | | CAS 61488-13-9, 26745-88-0, 25212-06-0, 28655-06-3, MITI 7-708x, EINECS registered, TSCA registered
Trade name：ETERNACOLL? 3000 series | | | | | | 1,6-Hexanediol | | | | |  1,6-Hexanediol is a valuable intermediate used in the synthesis of specialty chemicals and has applications in manufacturing a variety of polymers, such as polyurethanes, polyesters, and Polycarbonatediol. The configuration of 1,6-hexanediol, which contains terminally located hydroxyl groups, results in rapid and simultaneous reactions in the formation of numerous di-substituted products.
| | | CAS 629-11-8, MITI 2-240, EINECS 211-074-0, TSCA registered | | | | | | 1,5-Pentanediol | | | | |  1,5-Pentanediol is used in the production of polyurethanes for coatings, polyesters, and polycarbonatediols. Because of its low melting point, it is easier to handle than 1,6-hexanediol. The configuration of 1,5-pentanediol results in rapid and simultaneous reactions in the formation of numerous di-substituted products.
| | | CAS 111-29-5, MITI 2-240, EINECS 203-854-4, TSCA registered | | | | | | 1,12-Dodecanediol | | | | |  1,12-Dodecanediol is used as a raw material for polyurethane resins and polyester resins. The configuration of 1,12-dodecanediol, which contains a C12 linear chain with terminally located hydroxyl groups, enriches reactivity in the formation of numerous di-substituted products.
| | | CAS 5675-51-4, MITI 2-240, EINECS 227-133-9, TSCA registered | | | | | | 1,12-Dodecanedioic acid (DDA) | | | | |  DDA is used as a raw material for polyurethane, polyester, and polyamide resins, as well as a hardener for acrylic powder paints. When reacted with various alcohols and diamines, DDA produces polyester and polyamide resins with excellent performance, especially in hydrolytic resistance, flexibility, and heat stability.
| | | CAS 693-23-2, MITI 2-878, EINECS 211-746-3, TSCA registered | | | | | | 12-Aminododecanedioic acid (ADA) | | | | |  ADA is used as a raw material for making Nylon 12. Compared with laurolactum, ADA is produced under milder conditions and is used to manufacture polyurethane resins, hardeners for epoxy resins, and additives for plastics.
| | | CAS 693-57-2, MITI 2-3121, EINECS 211-754-7, TSCA registered | | | | | | 1,12-Dodecamethylenediamine | | | | |  1,12-Dodecamethylenediamine is used as a modifier for various polymers, as a hardener for epoxy resins, and as a raw material for polyurethane prepolymers and nylon resins.
| | | CAS 2783-17-7, MITI 2-2370, EINECS 220-489-6, TSCA registered | | | | | | Di-t-butylhydroquinone (DTBHQ) | | | | |  DTBHQ is used as a raw material for making epoxy resins.
| | | CAS 88-58-4, MITI 3-553, EINECS 201-841-8, TSCA registered | | | | | | Catechol ethyleneglycol ether | | | | |  Catechol ethyleneglycol ether is used to make coatings and other similar products.
| | | CAS 4792-78-3, MITI (not registered), EINECS 225-346-1, TSCA registered | | | | | | Glycerol carbonate | | | | |  Used in applications that include making electrodeposition coatings, glycerol carbonate is a colorless liquid with a high boiling point. Glycerol and dimethyl carbonate are used to make glycerol carbonate.
| | | CAS 931-40-8, MITI 5-525, EINECS 213-235-0, TSCA registered | | | | |
|
|
|
